fokipackage.blogg.se - Manually add opensprinkler

#Manually add opensprinkler install
#Manually add opensprinkler update
#Manually add opensprinkler upgrade
#Manually add opensprinkler software

You can do everything to opensprinkler via http commands (see API document: ) - that's basically all the plugin is based off - the http commands and responses. But the pluginopensprinkler works fine on local lan, no internet required.

#Manually add opensprinkler update

It also needs internet if you are using the auto-weather update functionality. can you confirm? Also, can individual zones be controlled manually?The Opensprinkler unit doesn't need internet connection to function and run zones, but i do think the native opensprinkler interface needs internet connection unless you locally store a javascript file on it so it can render it's web interface (I may be wrong here). The computer must be on the same network as the Raspberry Pi.I was looking at open sprinkler in hopes it does not need internet access to function, only local lan connected to homeseer controller. This will access the OpenSpinkler web interface. Open a browser on your computer to, where hostname is the name of your Raspberry Pi.If it returns nothing, then something went wrong check the previous steps. You can test with pgrep OpenSprinkler If it returns the process id number, then OpenSprinkler was started automatically and is running. Reboot your Pi and OpenSprinkler should be started automatically.Go ahead and run the executable to test it. If it compiles ok, you should have an executable /usr/local/OpenSprinkler/OpenSprinkler ready to go.

#Manually add opensprinkler software

The build script will ask if you want to run the software on startup, answer yes.

Go into the OpenSprinkler directory and build the firmware.

This will create a directory in /usr/local called OpenSprinkler.

Clone the OpenSprinkler firmware repository.

Change directory to /usr/local cd /usr/local.

sudo su so you don’t have to sudo for every command.

#Manually add opensprinkler install

Install GPIO Zero (optional, so you can run the pinout command later) sudo apt install python3-gpiozero.

#Manually add opensprinkler upgrade

Update/install any other packages you want For example:Īpt-get update apt-get upgrade Could update raspian: sudo apt-get dist-upgrade.

Change the hostname, passwords, and configure it: run: sudo raspi-config Enable SSH permanently.

Using Putty, open a remote session to the Raspberry Piĭefault hostname: raspberrypi user: pi pass: raspberry.

Install and run Putty on your computer.

Put the SD card in your Raspberry Pi and power it up.

This will enable Secure Shell, which will allow you to connect to your Raspberry Pi from a remote computer.

Add a file to enable SSH Create an empty file in the boot directory called ssh.

Enter your WiFi details, replacing the placeholder text with your own details.Ĭountry=AU ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network= Create a file wpa_nf in the base directory of the SD card. Put the SD card into your card reader on your computer.The following steps allow the Raspberry Pi access to your WiFi network and enable remote access.

I recommend connecting the Raspberry Pi Zero to your wireless network and accessing it remotely from your computer. Since this is a Raspberry Pi Zero, I did not connect any monitors or keyboards to it. The SD card that I suggest comes pre-loaded with a 'lite' version of Raspian. The web page is accessible only on my home WiFi network. To schedule my sprinkler system, I access a web page served by the Raspberry Pi on my home network. In this project, I took a new Raspberry Pi, installed OpenSprinkler on it, and used a simple relay board to trigger my home sprinkler system. Replace the old sprinkler controller in your garage with a web-page based Raspberry Pi controller.